Cupples' J&J Company Inc. Forming

Cupples' J&J Company Inc. provides forming with conventional and CNC brake presses and stamping presses.

Cupples' J&J Company Inc. has forming equipment as follows:

  • 39 each - CNC brake presses with up to 8 axis forming x 14 feet and up to 250 tons with front sheet-following arms
  • 1 each - 400 Ton CNC straight side gap frame hydraulic with 3 axis CNC back-stop
  • 2 each - Conventional brake presses with up to 330 tons x 12 feet
  • 1 each - OBI type stamping press - 95 tons x 55 strokes per minute with coil feeder
  • 1 each - OBI type stamping press - 70 tons x 100 strokes per minute
  • 1 each - Komatsu OBW 250 Type III open side gap frame double crank stamping press - 275 tons x 20-40 strokes per minute
  • 3 ea - Davi CNC 4-roll rolling machine - 7/16" x 72" with pre-bend
  • 1 ea - Faccin DP3 double pinch roll - 5/8" x 100" with pre-bend, or 3/4" x 50" with no pre-bend
  • 1 ea - Faccin DP3 2021 double pinch roll - 3/8" x 80" with pre-bend, or 1/2" x 50" with no pre-bend
  • 2 ea - Faccin/ASI 1513 initial pinch plate roll - 3/16" x 60" with pre-bend, or 1/4" x 48" with no pre-bend
  • 1 ea - Kohler leveling machine with 0.240 thick x 10.3" width capacity
  • 1 ea - 100 ton angle, channel, and beam rolling machine

See examples of Cupples' J&J Company Inc.’s formed parts below:

The forming areas are also supported by laser cutting, CNC punching, robotic welding, machine shop, screw machine, and general sheet metal fabrication divisions. Cupples' J&J Company Inc. could fabricate single parts up to entire assemblies.