Cupples' J&J Company Inc. - Laser Punch Combo, CNC Punching and Short Run Stamping

Cupples' J&J Company Inc. provides Laser Punch Combonation, CNC punching (turret press) and stamping services.
Cupples' J&J Company Inc. provides these services with the most state-of-the-art equipment.

CNC Punching

  • 1 EA Trumpf TC2020R CNC Punch
  • 1 EA Trumpf TC3000 3kw / 22 ton Laser Punch Combination
The capabilities are as follows:
  • Up to 50" x 100" travel (120" plus with repositioning)
  • All tools are indexable to 0.01 degree at 180 RPM - bi-rotational
  • Hits per minute up to 420 ea on 1-inch moves
  • Up to 1/4" punching and laser cutting thickness for mild steel
  • 3 second tool change with up to 4300 IPM positioning speed
  • Hydraulic forming up to 1/2"
  • Up and Down Extrusion capabilities
  • Cutting of formed parts up to 2" tall
  • Tapping from #6-32 up to 5/16"-18 with thread forming taps (2.8 seconds per hole)
  • High-speed beading and marking up to 2800 hits per minute

Stamping Presses

  • 1 EA - Accurpress - 400 ton CNC hydraulic open side gap frame press with 24" x 96" ram and 30" x 96" die plate. Equipped with Accurpress ETS 3000 3 axis CNC brake press control with 4 each additional length fingers
  • 1 EA - Komatsu - 250OBW 275 ton open side gap frame double crank stamping press, 20 to 40 strokes/min
  • 1 EA - Rousselle - 95 ton stamping press with coil feed, running at 55 strokes per minute with 12" wide x 12" long max feed
  • 1 EA - Rousselle - 70 ton stamping press, running at 100 strokes/min

Products

  • Brackets (Flat or Formed) with Tapped Holes
  • Flat Plates
  • Guards
  • Flanges
  • Washers
  • Heat Shields
  • Misc. Sheet Metal Assemblies
  • Machined Style Parts Up to 1" Thick
  • Welded Assemblies
CNC punching and stamping are also supported by laser cutting, CNC forming, robotic welding, machine shop, screw machine, and general sheet metal fabrication divisions. Cupples' J&J Company Inc. could fabricate single parts up to entire assemblies.