Cupples' J&J Employee Benefits
Cupples' J&J Customer Sites and Standards
Cupples' J&J Forming
Cupples' J&J Company provides Forming with Conventional and CNC Brake Presses and Stamping Presses.
Cupples J&J Company has Forming Equipment as follows;
24 each - CNC Brake Presses with up to 8 axis forming x 14 feet and up to 250 tons with front sheet following arms.
1 each - 400 Ton CNC Straight Side Gap Frame Hydraulic with 3 axis cnc back-stop
2 each - Conventional Brake Presses with up to 330 tons x 12 feet.
1 each - OBI Type Stamping Presses - 95 ton x 55 strokes per minute with Coil Feeder
1 each - OBI Type Stamping Presses - 70 tons x 100 strokes per minute
1 each - Komatsu OBW 250 Type III Open Side Gap Frame Double Crank Stamping Presses - 275 tons x 20-40 strokes per minute
2 ea - Davi CNC 4 Roll Rolling Machine - 1/4" x 72" with Pre-Bend
1 ea - Faccin DP3 Double Pinch Roll - 5/8" x 100" with Pre-Bend, or 3/4" x 50" with No Prebend
1 ea - Faccin DP3 2021 Double Pinch Roll - 3/8" x 80" with Pre-Bend, or 1/2" x 50" with No Prebend
2 ea - Faccin / ASI 1513 Initial Pinch Plate Roll - 3/16" x 60" with Pre-Bend, or 1/4" x 48" with no Prebend
1 ea - Kohler Leveling Machine with .240 thick x 10.3" width capacity
1 each - 100 Ton Angle, Channel and Beam Rolling Machine
See Examples of Cupples Formed Parts below;
The Forming Areas are also supported by Laser Cutting , CNC Punching , Robotic Welding, Machine shop , Screw Machine and General Sheet Metal Fabrication Divisions. Cupples' J&J could fabricate single parts up to entire assemblies.
Laser, Waterjet and Plasma Cutting
CNC Punching and Short Run Stampings
Mig,Tig, Stick, Spot, Projection and Robotic Welding
CNC and Conventional Machine Shop
Screw Machine and Production CNC Machining and Turning
Design and Build Special Machines
Millwright, Electrical, Moving and Rigging and Plant Maintenance Services